Brushless Motor Controller DC 12-36V 500W PWM Driver Board

This Brushless Motor Controller DC 12-36V 500W PWM Driver Board is used for the 3-phase brushless motor with hall sensor, but not suited for all 3-phase brushless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor no-load working current is too large, the speed is not stable, the efficiency is low, and cant start-up with a load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect.

Specifications and Features:

1. Protection:                                      Overload protection, locked-rotor protection, over-current protection.
2. Analog voltage speed regulation:       0-5V
3. Operating temperature:                    -40 ~ +85
4. Drive power:                                    500W (related working voltage).
5. Size:                                               62 x 42.5 x 17 mm.
6. Weight:                                           26 gm.
7. Speed control function:                     voltage speed regulation or single chip.
8. microcomputer control:                     PWM speed regulation.

Pin Connection:

5V– Driver board internal output voltage

Control port:

Power port :

Application notes:

1. Confirm that the voltage and power parameters of the motor do not exceed the range of the driver board as specified.
2. The JYQD-V6.3E2 driver board is a bare board without housing and heatsink. If the power of the motor below 60W, it does not need to add heatsink, It only needs to ensure normal ventilation and wall insulation. If the power of the motor more than 100W, it must add heatsink.
3. Please take note that JYQD-V6.3E2 driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
4. The 5V output port on the driver board prohibits connect an external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
5. The Signal terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.

Package Includes :

1 x Brushless Motor Controller DC 12-36V 500W PWM Driver Board.

Specifications: