10A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)

The 10A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)  is suitable for the DC brushed motor (or DC load) within 10A. It comes with the metal shell and connective label, which makes it very easy to install and use.

It has potentiometer with adjust speed switch function, and button switch function.

Note : Before you attempt to wire the controller, make sure power is off.

WARNING :

DO NOT REVERSE POSITIVE AND NEGATIVE POWER LOADS. THIS WILL DAMAGE THE CONTROLLER.

TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.

1. Connect wires refer to the wiring diagram.

2. Turn on the power.

3. Adjust the potentiometer.

Red Line: Power +       Black Line: Power –

Blue Line: Motor+       Yellow Line: Motor –

Features:

• Adjustable speed range: 0%-100%.
• Speed adjustment way: Potentiometer.
• Output voltage: Linear under load.
• Speed control type: Basins.
• Output voltage: Load Linear
• Type: Adjusting flow
• The motor running condition adjustment: Forward /Stop / Reverse
• Reverse polarity protection: Yes.
• Suitable Motor: DC brush motors.

Specification:

• Driver Model:10A PWM DC Motor Speed Regulator.
• Operating Voltage (VDC):9 ~ 60
• Peak Current (A):10
• Continuous Current (A): With in 10A
• Continuous power:600W
• PWM frequency: 25KHz.
• Speed type: Modulated Current.
• Speed mode: linear potentiometer 270 degrees.
• Speed range: 0-100%.
• Cable Length (cm):13
• Arduino Shield : No- can be used with Wire connection.
• Speed Control: Yes
• Dimensions in mm (L x W x H): 90 x 50 x 35
• Weight (gm): 105

Package Includes:

1 x 10A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)